This new digital pocket scale has a removable Stainless Steel tray so you can weigh on the stainless steel surface or the plastic surface.

The stainless steel tray also doubles as a weighing tray.

Easy to use, 3-key operation Back Lit Display Flip-top cover protects weighing surface when not in use 650 g x 0.1 g Thin, compact design

Front View Closed

6K to 24K range, state-of-the art electronic gold testing technology from Tri-Electronics.
Technological breakthrough that allows for the measurement of low to high karat gold products, assuring the buyer of gold content in the most critical gold alloys.

Microprocessor based technology allows user safely and non-destructively determine gold content of alloys up to 24 karat in all four gold colors. Karat readings appear directly on LCD display.

The built in microprocessor makes testing simple - simply squeeze the special gel from the probe, select the color of gold you are testing, and obtain the reading in karats and percentage. Also reads "Platinum" and "Not Gold."
Detects platinum and gold plating.

Packaged in durable hard plastic case.
Comes with instructional video.
Measures 12" x 10" x 3" (305 x 254 x 76 mm).
UL listed.
Three year warranty.
Also operates using two 9 volt batteries (not included).

THE GXL-24PRO DISPLAY UNIT

THE MECHANICAL SENSOR

The Mechanical Sensor for the GXL-24PRO Gold Tester consists of two parts: (1) the sensor body; (2) a polyethylene tube with gel. The polyethylene tube must be placed inside of the sensor's body before beginning a test.
When using the Sensor, be sure that:

1. The sensor nozzle platinum contact and slots are clean. Use a cotton swab moistened with cleaner to clean the platinum contact and dry it before commencing tests and after every 6-8 repetitive tests.
2. Dispense a drop of gel before the start of each test.
3. It is recommended that the sensor be thoroughly cleaned with Tri SC-10 sensor cleaner when gel tube is changed or if gel is backing up around the plunger. The cleaner can be obtained from Tri Electronics or from your Tri dealer.

LOADING/CHANGING THE POLYETHYLENE GEL TUBE

1. Take off the nose cone cap (See Diagram).
2. Remove the Stationary Cap by turning the Stationary Cap (light colored barrel) counter clockwise. Please remember that the stationary Cap and the Rotary Cap are not detachable.
3. Insert the Feed Screw Engagement into the appropriate slot of the Rotary Cap. Be sure that the Feed Screw is fully engaged.
4. Take off Tube Cap.
5. Insert the polyethylene gel tube, until it is fully lodged in the sensor and turn the light colored barrel clockwise until fully fastened. Do not turn the dark colored top barrel clockwise or it will damage the mechanism.
6. Turn the dark colored top barrel counter clockwise until the first drop of gel appears at the sensor nozzle (about 10-20 times to fill the cone).

Diagram shows each part of the mechanical sensor.

Sensor and Polyethylene Gel tube

OPERATION PROCEDURE

1. Load the polyethylene gel tube into the sensor.
2. Connect the long black wire to the sensor's plug outlet, the short black wire connector to the display unit, and the red wire to the testing plate.
3. Turn the unit "ON". The unit should display "Clean sensor tip ".
4. Before the start of testing, use the sensor nozzle cleaner or any small sharp instrument to remove dried or used gel from the dispenser opening and slots and clean the sensor tip thoroughly with a cotton swab wetted with alcohol, then dry the tip thoroughly.
5. Prepare the item for testing by thoroughly vigorously cleaning a spot on the jewelry with the eraser provided. When testing the 18-24K (750-999) gold, be sure that the eraser tip does not have a black deposit. Clean the eraser on a paper. Also clean the area on the item to he clipped and place cleaned item in clip.
6. The testing point on the object should he close to, BUT NOT TOUCHING, the alligator clip.
7. Holding the sensor on the vertical position with the nozzle down, twist the Rotary Cap counter clockwise, a click at a time, until a drop of gel appears on the tip. Wipe this first drop 0/gel on the towel and turn (usually one or two clicks) until afresh drop appears. Use a minimum amount of gel for testing, especially for high karatage gold tests (above 18k). After dispensing a small dome of gel on the sensor tip wipe the tip on a piece of tissue paper by touching the tip to the tissue while holding the sensor in a vertical position to the paper. Do NOT use a dome of gel or an amount of gel that causes excess gel to appear along the edge of the sensor tip while testing. If there is not a sufficient gel to test the instrument will read "TRY AGAIN", but will not give an erroneous reading. Do not let gel or sensor nozzle touch the alligator clip!
8. Maintain the sensor tip flat against the sample (perpendicular to sample) and hold firmly in the same position approximately five (5) seconds while the instrument displays the gold value in karat and European standard.

WeighMax Switch Blade Digital Scale is a cool and fashionable design.  Elegant blue back light for easy reading. Four unit exchange function and offers great range of 500 grams to as little as 0.1 of a gram.

FEATURES: Scale Capacity 500g Scale Resolution 0.1g Backlit LCD Cover Works As Weighing Tray Great for weighing on the go. 4 Weighing Modes g, oz, ozt, dwt 10 Year Warranty

Specifications
Capacity	500g / 17.635oz / 16.075ozt / 321.5dwt
Readability	0.1g / 0.01oz / 0.01ozt / 0.1dwt
Display	Backlit LCD Display
Platform dimensions	1.9 x 1.5"
Scale dimensions	3.9 x 1.7 x 0.9"
Power	1 X CR2032 battery included
Calibration Weight	500g Calibration Weight (Sold Seperate)

Model: CR2032

American Weigh Scales, Inc.

Features: 100g x 0.002g Flip down cover protects delicate weighing surface. Large Back-lit LCD Programmable Auto-off and Backlight Includes AC Adapter, or use four AAA batteries for maximum portability Comes with calibration weight and weighing tray. Reads in ct, g, oz, ozt, dwt, and gn Hard Plastic Case Included

miniPRO-100 User’s Manual 100g x 0.002g

WeighMax Black Box scale offers great range from 500 grams to as little as 0.01 of a gram.

FEATURES: Scale Capacity 500g Scale Resolution 0.1g Backlit LCD Slip Open Cover Works As Weighing Tray Great for weighing on the go. 4 Weighing Modes g,oz,gn,dwt WeighMax Lifetime Warranty

Specifications
Capacity	500g
Readability	0.1g
Display	Backlit LCD Display
Platform dimensions	2.0 x 2.5"
Scale dimensions	2.0 x 3.5 x 0.75"
Power	2 X AAA batteries included
Calibration Weight	500g Calibration Weight (Sold Seperate)

US Sonic is the same suede look and design as the TNT Pro but has the higher capacity 500 x 0.1g instead of 250 x 0.1g.

Features: Backlit LCD Display Stainless Steel Flip Over Tray EasyCal - One Button Calibration Locking Mode Energy-Saving Auto Shut Off 5 Year Warranty

Specifications:

Extra Test Strips for the GT-100 Golden Touch Tester

The Golden Touch Electronic Gold Tester will also establish if the tested jewelry is of 22K 18K 14K or 9K gold. Easy user friendly instructions are included with each unit. Instructions are also printed on the inside cover of the unit. It is packed in an attractive box and also contains a package of 50 test strips. Each strip is good for several tests. After use, the marks on the strip will completely disappear within a few hours, and the same strip can be reused for testing

Calibration Procedure:

1. Press[ON/OFF] key to turn on the scale. Wait until "0.0" or "0.00" is displayed,
2. Press and hold [ON/OFF] key for 3 seconds and then you will see"CAL" and then "300.00" on the LCD.
3. Place the required 300 gram calibration weight onto the platform.
4. If you see "F" on the LCD, this indicates that the calibration is finished successfully.
5. If you see "E" on the LCD, this indicates that the calibration is failed.
6. The scale will turn off automatically after the calibration is finished.

Professional Jeweler's Lighted Eye Loupe - 20X Magnification - Polished Chrome - 18mm Lens Area

•  The classic jeweler's eye loupe - updated with LED-technology illumination;
• Large 18mm lens area Powerful 20X magnification from optical-quality doublet glass lenses shows ultra-fine detail
• Twin super-bright LED focus pure white light on subject to add extra clarity & definition
• Heavy-weight metal body with mirror-polish chrome finish; self-enclosing case
•  Essential jeweler's and watchmaker's tool

Great for collectibles, photos & hobbies Premium-quality magnification tool designed for professionals - super-useful for hobbies, arts crafts and collectibles. LED lights for hours with included button-cell batteries easy to change (tool included).

For Testing Gold, Silver, Platinum using test acid.

The Pro-Premium stone, in the suppliers opinion, is equal if not superior to Arkansas and Natural River Danube Test Stones. Arkansas and Natural River Danube test Stones in this size can cost $60 to $70. for a stone this size.

Advantages of the Pro-Premium Stones

• Large 3 x 6 x 3/8 inch
• This stone has a soft rubber backing that grips and protects the work surface.
• Large size keeps you hands free and away from the acid.
• If you test large lots of gold these stones are great !!! Work 5 times faster than with 2 x 2 inch Stones.
• Black in color for great contrast
• Extremely fine finish . With a little practice a test can be made with one light strike leaving no scratch marks on the item being tested. A big advantage when testing non scrap items.
• Easy To clean . Clean with a drop of 22K acid and rinse with water .
• Easy to follow instructions are included (test acid are not included )

Photos Shows 6 magnification of one strike mark of gold and silver on each stone. 

ARKANSAS STONE	PRO-PREMIUM	ECONOMY STONE (SOLD WITH MOST KITS)

This item is only shipped UPS Ground. Can Not be shipped to a PO Box. No APO / FPO Must be shipped to a Physical Address. Shipped Only to the 48 Contiguous USA States If any other shipping is selected at checkout the order may be shipped by UPS Ground or canceled by Scales n Tools.

Lets you test 10k, 14k, 18k, 22k gold along with Silver and Platinum. Kit includes 1 vial each of 10-14-18-22 karat, Silver and Platinum acids, plus an Economy Test Stone and basic instructions.

This 10x 21mm in diameter double glass lens jewelers loupe has an all chrome finish. Use for jewelry, stamps, coins, watches, hobbies, antiques, collectors, photos and more. Includes a plastic box storage case. The 10x Folding Polished Chrome Metal 21mm Jeweler's Loupe can be used in many places: online stores, jewelry stores, rock and coin collectors or shop owners, leisure markets, dealer shows, hobby, craft and auctions.

• 10X Power
• Size: 21 MM Lense
• Chrome plated finish
• Folds into metal casing
• Store in included Plastic Case

A lovely high fashion lady dressed in Light  Blue and White dress and with pretty big  Teal Blue roses on the dress and hat.

The doll has a umbrella opening mecanism that alows her to stand on the flat surface.

The hands and head are made out of beautifully crafted porcelain.

Each doll comes with the Certificate of Authenticity.

This is not a toy, for ornamental purpose only, not suitable for children under 14 years old.

Calibration Procedure:

1. Turn on the scale, and press C/M key,and hold it until the display reads "Cal".

2. Press and release the C/M key again.

3. The dispaly should flash "Cal" and then flash "100.0" clip the calibration wieght to the scale.

4. Calibration is complete when "Pass" is displayed on the screen.

<><><><><><><><>

Removable bowl Tare feature 10 year warranty Backlit Display Simple 2-key operation

<><><><><><><><> Weighing Units kg/g , lb/oz Capacity 5 kg x 1.0g 10 lb x 0.1oz Power 4 "AA" alkaline batteries (included) Warranty 10 Year Warranty Bowl Dimensions 7.75" x 7.75" x 2.25" Base Dimensions 7.5" x 7.5" x 2" Weighing Surface 5.25" diameter

W-2810 User’s Manual 5000 x 1g

Avoid any exposure to extreme heat or cold. Your scale will work better when operating in normal room temperature. Always allow the scale to acclimate to normal room temperature for at least an hour before use.

Give the scale sufficient warm up time before use. Usually 30 to 60 seconds to give the internal components time to stablize.

Keep your scale in a clean environment. Dust, dirt, moisture, vibration, air currents, or a close proximity to other electronic equipment can cause an adverse effect on the reliability and accuracy of your scale.

Handle with care. Gently apply all items to be weighed onto the weighing surface. Although this scale is designed to be quite durable, avoid rough treatment as this may permanently damage the internal sensor.

Do not shake, drop, or otherwise shock the scale. This is a precision instrument and must be handled with extreme care.

Only operate the scale on a stable, vibration free surface.Always store in a dry place to avoid moisture accumulation on internal components.

I. Operation

Place the scale on a flat surface. If you do not wish to use the bowl, remove it before proceeding

1. Select between grams or ounces using the switch on the bottom of the scale.

2. Press ON/OFF key.

3. Wait until [0.0] is displayed.

4. You may now add the item(s) to be weighed.

II. Tare Weighing

You may use your own container by doing the following.

1. Turn on scale as described above.

2. Place the container ( tare item ) on the platform.

3. Press TARE and wait until [0.0] is displayed.

4. Add the "net-weight-item".

Error Code Descriptions:

Error: Nothing on screen, [LO]

Solution: Replace Batteries

Error: [EE] 

Solution: Load is in excess of 5000g, remove the extra load

WeighMax Elegant Square Glass Top With Black Edge and Face Design

Body and Bathroom Scale

Item No.: W-L330

DESCRIPTION

SPECIFICATION:

• Equipped with a high precision strain gauge sensor
• 150kg / 330lb / 24st Capacity
• Division 100g/ 0.2lb
• Unit Switch: LB - pounds / KG - Kilogram / ST - Stone
• Foot tap switch
• Blue Backlight LCD Display
• Automatic zero reset
• Automatic Shut Off in 8 to 10 seconds after steeping off the scale.
• Overload indicator
• 3 Volt CR2032 Lithium Battery included
• WeighMax 2 Year Limited Warranty

Capacity	330lb / 150kg / 24st
Readability	0.2lb / 0.1kg
Scale Dimensions	12" x 12" x 1.75"
Platform Dimensions	12" x 12"
Power	2 x 3 Volt CR2032 Lithium Battery included

Calibration Procedure:

1. With the scale turned on and placed on a stable surface.
2. Press CAL key, till the display shows 500.0.
3. Place a 500g standard weight onto the middle of the weighing platform.
4. Calibration succeeds, and the scale is ready for normal use now.

Calibration Procedure:

1. Turn on the scale by pressing (ON/OFF) key wait until the LCD displays "0.00".
2. Press and HOLD the [MODE] key for 3 seconds, the LCD will display "CAL", Now release the [MODE] key.
3. Press [MODE] key again, the LCD will display "CAL" followed by the required calibration weight "100.00".
4. Add the required calibration weight, next the display will show "PASS" and return to normal weighing mode.
5. Put away the calibration weight and press [ON/OFF] to turn off the scale and the calibration is finished!

]]> sales@scales-n-tools.com (Scales-n-Tools.com) http://www.scales-n-tools.com/index.php?main_page=product_info&products_id=449 Mon, 21 Sep 2009 14:55:44 -0500 14.98 USD 449 0.8 US Balance 356 US-ACE http://www.scales-n-tools.com/images/US-ACE.jpg http://www.scales-n-tools.com/index.php?main_page=product_info&products_id=1 http://www.scales-n-tools.com/index.php?main_page=product_reviews&products_id=1

The US TNT-PRO is an EasyCal - One Button Calibration with a flip over stainless steel weighing tray. This scale has a bright backlit LCD display for easy reading. The hard cover protects the weighing surface while not in use. This scale has a  capacity of 250 grams, a case with the Suede look and feel and a 5 year manufacture limited warranty.

FEATURES: 250g Capacity 0.1g Resolution Suede feel case Stainless Steel Flip Over Tray  LCD Backlit Display 4 Weighing Modes g,oz,dwt,gn EasyCal - One Button Calibration  Locking Mode Hard Cover Protects The Weighing Surface Energy-Saving Auto Shut Off

Specifications
Capacity	250g
Readability	0.1 g
Display	LCD Backlit Display
Modes	g, oz, dwt, gn
Warranty	5 Year Limited Manufacture Warranty
Power	2 x AAA batteries Included
Calibration Weight	100g Weight (Sold Seperate can be purchased here)

]]> sales@scales-n-tools.com (Scales-n-Tools.com) http://www.scales-n-tools.com/index.php?main_page=product_info&products_id=1 Tue, 08 Jun 2010 10:58:25 -0500 12.99 USD 1 0.8 US Balance 59 TNT-PRO http://www.scales-n-tools.com/images/tntpro.jpg http://www.scales-n-tools.com/index.php?main_page=product_info&products_id=509 http://www.scales-n-tools.com/index.php?main_page=product_reviews&products_id=509

The US Balance US-Stealth The Stealth is a reliable electronic pocket scale. The removable lid can be used as a tray also. However, if you use your scale near a electronic device such as a microwave, cell phone, computer, etc., you can get a false reading and even damage your scale.

FEATURES: Scale Capacity 500g Scale Resolution 0.1g Backlit LCD Display 4 Weighing Modes g / oz / gn / dwt Hard Cover Protects The Weighing Surface. Tare Function Calibration Weight (NOT Included) 5 Year Manufacturer's Limited Warranty

Specifications
Capacity	500g / 17.64oz / 7716gn / 321.5dwt
Readability	0.1 g / 0.01oz / 1.5gn / 0.1dwt
Display	Backlit LCD Display
Scale Dimensions	2.75" x 2.75" x .5"
Platform dimensions	2.625" x 1.875"
Power	2 x AAA batteries Included
Calibration Weight	100g Calibration Weight ( Sold Seperate )

Calibration Procedure:

1. Place the scale on a level, flat and stable surface,
2. Power on the scale with the "I" on / off button (left side of the scale)
3. press and hold the CAL / MODE button (on the right side of the scale marked Z / C) . The display will show "CAL" then release the button,
4. Now press and release the CAL / MODE button again and "100" will flash in the display,
5. Immediately place a 100g weight on the scale.
6. The scale will reset itself and display "PASS" on the screen.

Calibration is now complete.

American Weigh Scales, Inc.

Model: BT2-500

The new BT2-Series improves on the original BT-Series touchscreen scale by adding a flip-open protective cover, which can also be removed to use as an expansion tray. The rubberized black and silver exterior also give the scale a much more elegant look.

Features: 1000 x 0.1g The flip-open removable cover can be used as an expansion tray. Includes vinyl pouch to keep the scale in. Back-lit touchscreen LCD display. Calibrates with a 500 gram weight or a 100g weight (not included) can be added here. Backed by a 10 year American Weigh Warranty!

Capacity	1000g / 35.27oz / 32.15ozt / 643.0dwt / 5000ct / 15432gn
Readability	0.1g / 0.01oz / 0.01ozt / 0.1dwt / 0.5ct / 2gn
Scale Dimensions	4.9 x 3.0 x 0.75
Platform Dimensions	2.7 x 2.5 "
Power	2 x AAA (included)
Warranty	10 Year Limited Warranty

Fast Weigh Scales, Inc.

The ES Series is a lightweight portable scale with quick accurate results. Available in 4 colors, and features a detachable cover that can be used as an expansion tray.
Features: Easy to use, 3-key operation Back Lit Display Stainless steel weighing tray Flip-top cover protects weighing surface and snaps off to become an expansion tray 400g x 0.1g Thin, compact design User Calibration using a 200g Weight NOT included. (The 200g Calibration Weight can be Purchased Here)	Each Sold Seperate
Available in Black, Silver, Blue, or Camo

Never load the scale with more than the maximum capacity. Overloading will permanently damage it!

Give your scale sufficient warm up time. Usually 30-60 seconds before calibration to give the internal components a chance to stabilize.

Keep your scale in a clean environment. Dust, dirt, moisture, vibration, air currents and a close distance to other electronic equipment can all cause an adverse effect on the reliability and accuracy of your scale.

Handle with care. Gently apply all items to be weighed onto tray top. Although this scale is designed to be quite durable, try to avoid rough treatment as this may permanently damage the internal sensor.

Avoid shaking, dropping or otherwise shocking the scale. This is a precision instrument and must be handled with extreme care. Only operate the scale on a stable, vibration free surface.

I. OPERATION

1. Press [I/O] key.

2. Wait until "0.0" is displayed.

3. Put the object(s) on the weighing platform.

4. Using the [M] key, you can switch between the weighing units.

II. TARE WEIGHING

1. Turn on scale as described above.

2. Place the "tare item" on the platform.

3. Press [T] and wait until "0.0" is displayed.

4. Add the "net-weight-item".

III. CALIBRATION

Fast Weigh Scales, Inc.

The ES Series is a lightweight portable scale with quick accurate results. Available in 3 colors, and features a detachable cover that can be used as an expansion tray.
Features: Easy to use, 3-key operation Back Lit Display Stainless steel weighing tray Flip-top cover protects weighing surface and snaps off to become an expansion tray 400g x 0.1g Thin, compact design User Calibration using a 200g Weight NOT included. (The 200g Calibration Weight can be Purchased Here)	Each Sold Seperate
Available in Black, Silver or Blue

Never load the scale with more than the maximum capacity. Overloading will permanently damage it!

Give your scale sufficient warm up time. Usually 30-60 seconds before calibration to give the internal components a chance to stabilize.

Keep your scale in a clean environment. Dust, dirt, moisture, vibration, air currents and a close distance to other electronic equipment can all cause an adverse effect on the reliability and accuracy of your scale.

Handle with care. Gently apply all items to be weighed onto tray top. Although this scale is designed to be quite durable, try to avoid rough treatment as this may permanently damage the internal sensor.

Avoid shaking, dropping or otherwise shocking the scale. This is a precision instrument and must be handled with extreme care. Only operate the scale on a stable, vibration free surface.

I. OPERATION

1. Press [I/O] key.

2. Wait until "0.0" is displayed.

3. Put the object(s) on the weighing platform.

4. Using the [M] key, you can switch between the weighing units.

II. TARE WEIGHING

1. Turn on scale as described above.

2. Place the "tare item" on the platform.

3. Press [T] and wait until "0.0" is displayed.

4. Add the "net-weight-item".

III. CALIBRATION

American Weigh Scales, Inc.

The compact design and amazing overload protection of the AMW-Card scale make it one of the most durable pocket scales on the market. This series is available in 3 colors and includes an expansion tray and vinyl pouch.
Features: Easy to use, 3-key operation Back-Lit Display Leather carrying pouch for safe transportation Removable cover protects weighing surface and doubles as an expansion tray Stainless steel weighing surface 400g x 0.1g Small and thin card design. Easily fits in pocket.
Available in Charcoal Gray, Silver, or Blue

American Weigh Card Scale

Never load the scale with more than the maximum capacity. Overloading will permanently damage it!

Give your scale sufficient warm up time. Usually 30-60 seconds before calibration to give the internal components a chance to stabilize.

Keep your scale in a clean environment. Dust, dirt, moisture, vibration, air currents and a close distance to other electronic equipment can all cause an adverse effect on the reliability and accuracy of your scale.

Handle with care. Gently apply all items to be weighed onto tray top. Although this scale is designed to be quite durable, try to avoid rough treatment as this may permanently damage the internal sensor.

Avoid shaking, dropping or otherwise shocking the scale. This is a precision instrument and must be handled with extreme care.

Only operate the scale on a stable, vibration free surface.

I. OPERATION

1. Press [ON/OFF] key.

2. Wait until "0.0" is displayed.

3. Put the object(s) on the weighing platform.

American Weigh Scales, Inc.

The compact design and amazing overload protection of the AMW-Card scale make it one of the most durable pocket scales on the market. This series is available in 3 colors and includes an expansion tray and vinyl pouch.
Features: Easy to use, 3-key operation Back-Lit Display Leather carrying pouch for safe transportation Removable cover protects weighing surface and doubles as an expansion tray Stainless steel weighing surface 400g x 0.1g Small and thin card design. Easily fits in pocket.
Available in Charcoal Gray, Silver, or Blue

Capacity	400g / 14.110oz / 12.861 / 257.21
Readability	0.1g / 0.005oz / 0.005ozt / 0.1dwt
Scale Dimensions	3.9 x 3 x 0.5 "
Platform Dimensions	3.5 x 2.1 "
Warranty Calibration	10 Year Limited Warranty 200g Calibration weight ( not included) To purchase CLICK HERE
Power	2 "CR2032" Batteries (included)

American Weigh Card Scale

Never load the scale with more than the maximum capacity. Overloading will permanently damage it!

Give your scale sufficient warm up time. Usually 30-60 seconds before calibration to give the internal components a chance to stabilize.

Keep your scale in a clean environment. Dust, dirt, moisture, vibration, air currents and a close distance to other electronic equipment can all cause an adverse effect on the reliability and accuracy of your scale.

Handle with care. Gently apply all items to be weighed onto tray top. Although this scale is designed to be quite durable, try to avoid rough treatment as this may permanently damage the internal sensor.

Avoid shaking, dropping or otherwise shocking the scale. This is a precision instrument and must be handled with extreme care.

Only operate the scale on a stable, vibration free surface.

I. OPERATION

1. Press [ON/OFF] key.

2. Wait until "0.0" is displayed.

3. Put the object(s) on the weighing platform.

American Weigh Scales, Inc.

The compact design and amazing overload protection of the AMW-Card scale make it one of the most durable pocket scales on the market. This series is available in 3 colors and includes an expansion tray and vinyl pouch.
Features: Easy to use, 3-key operation Back-Lit Display Leather carrying pouch for safe transportation Removable cover protects weighing surface and doubles as an expansion tray Stainless steel weighing surface 400g x 0.1g Small and thin card design. Easily fits in pocket.
Available in Charcoal Gray, Silver, or Blue

Capacity	400g / 14.110oz / 12.861 / 257.21
Readability	0.1g / 0.005oz / 0.005ozt / 0.1dwt
Scale Dimensions	3.9 x 3 x 0.5 "
Platform Dimensions	3.5 x 2.1 "
Warranty Calibration	10 Year Limited Warranty 200g Calibration weight ( not included) To purchase CLICK HERE
Power	2 "CR2032" Batteries (included)

American Weigh Card Scale

Never load the scale with more than the maximum capacity. Overloading will permanently damage it!

Give your scale sufficient warm up time. Usually 30-60 seconds before calibration to give the internal components a chance to stabilize.

Keep your scale in a clean environment. Dust, dirt, moisture, vibration, air currents and a close distance to other electronic equipment can all cause an adverse effect on the reliability and accuracy of your scale.

Handle with care. Gently apply all items to be weighed onto tray top. Although this scale is designed to be quite durable, try to avoid rough treatment as this may permanently damage the internal sensor.

Avoid shaking, dropping or otherwise shocking the scale. This is a precision instrument and must be handled with extreme care.

Only operate the scale on a stable, vibration free surface.

I. OPERATION

1. Press [ON/OFF] key.

2. Wait until "0.0" is displayed.

3. Put the object(s) on the weighing platform.

American Weigh Scales, Inc.

Introducing the NEW Mouse Scale from American Weigh Scales. This scales acts as both an optical mouse and a precision pocket scale. Simply plug the included USB cord into the scale to use with your laptop or computer.

Features: USB Cable included Back-lit LCD Display Two key operation Compatible Scroll Wheel Removable cover can be used as a tray. 10 Year American Weigh Warranty

Capacity	100g / 3.528oz / 500ct / 1543gn
Readability	0.01g / 0.001oz / 0.05ct / 0.1gn
Scale Dimensions	2.3" x 4.8" x 1.5"
Platform Dimensions	2.25" x 2.75" Stainless Steel
Power	Internal Rechargeable Battery (USB cable included)
Warranty	10 Year Limited Warranty

American Weigh Scales, Inc.

Features: 50g Capacity 0.01g Resolution Super Small: Only 3.4 x 2.9 x 0.465 inches closed! And only 0.367" open!! Extremely portable. Reads in g, oz, gn and ct All 5 inserts included Country Techno Rock Rap Punk Vinyl Pouch Included
*Carrying Pouch Included

Model	Mini CD-300	Mini CD-50
Capacity	300g 10.585oz 9.645ozt 193dwt	50g 1.764oz 250ct 771.5
Resolution	0.1g 0.005oz 0.005ozt 0.1dwt	0.01g 0.001oz 0.05ct 0.2gn
Display	Backlit LCD
Calibration Weight	300g	50g
Platform Dimensions	2-5/8 x 2-1/16 inch
Scale Dimensions	3-3/8 x 2-7/8 x 7/16 inch
Power	two (2) CR2032 Batteries
Gross Weight	81.2 g

]]> sales@scales-n-tools.com (Scales-n-Tools.com) http://www.scales-n-tools.com/index.php?main_page=product_info&products_id=185 Sun, 15 Feb 2009 20:26:59 -0600 24.98 USD 185 0.7 American Weigh 40 MiniCD-50 http://www.scales-n-tools.com/images/country2_insert.jpg http://www.scales-n-tools.com/index.php?main_page=product_info&products_id=524 http://www.scales-n-tools.com/index.php?main_page=product_reviews&products_id=524

Front View Closed

This new digital pocket scale has a removable Stainless Steel tray so you can weigh on the stainless steel surface or the plastic surface.

The stainless steel tray also doubles as a weighing tray.

Easy to use, 3-key operation Back Lit Display Flip-top cover protects weighing surface when not in use 100 g x 0.01 g Thin, compact design

Weighing Units grams, ounces, troy ounces, pennyweights Capacity 100g / 3.528oz / 3.21ozt / 64.3dwt Calibration User Calibration with 100g calibration weight ( not included) To purchase CLICK HERE Power 2 "AAA" Batteries Warranty 1 Year Warranty Product Dimensions 5" (l) x 3" (w) x 0.75" (h) Tray Dimensions 2.5" x 3" Operating Temp. 50 F - 86 F

Top View

American Weigh Scales, Inc.

The AMW 810 makes the perfect kitchen pal. Its durable and user friendly design makes everyday kitchen measuring quick and very easy. The backlit LCD display helps make the numbers viewable and easy to read. This scale offers diversity with functionality. Use the bowl to weigh your ingredients or remove the bowl and place your items directly on the weighing surface. Need more surface? Take it one more step further. Using the tare feature will give you that extra control to use a larger flat surface for additional weighing surface. Clean up is easy and a snap; the sturdy and durable bowl is dishwasher safe. Want grams or pounds? Change modes with a click of a switch. The AMW 810 is also backed with our incredible 10 year warranty! For functionality and reliability the AMW 810 is the perfect kitchen pal that gets the job done!

Features: 11lb Capacity (5kg) Display resolution of 0.1oz / 1g Removable bowl Tare feature 10 year warranty Backlit Display Simple 2-key operation

Capacity	11lb / 5kg
Readability	0.1oz / 1g
Scale Base Dimensions	7.5 x 7.5 x 2"
Bowl Dimensions	7.75 x 7.75 x 2.25
Warranty	10 Year Limited Warranty
Power	4 x AA Batteries (included)

American Weigh Scales, Inc.

Features: 250g Capacity 0.1g Resolution Backlit LCD Flip-open lid protects the delicate weighing surface. Great for weighing on the go. Reads in g, oz, ozt, and dwt Stainless steel weighing platform.

Capacity	250g x 0.1g 8.820oz x 0.005oz 8.540 ozt x 0.005ozt 160.75dwt x 0.1dwt
Callibration	Calibration weight 200g ( not included) To purchase CLICK HERE
Scale Dimensions	5 x 3 x 0.75
Platform Dimensions	2.5 x 3
Power	2 x AAA (included)

AMW Series Manual

American Weigh Scales, Inc.

Model: PN-510A

Presenting the new line of precision and analytical balances from American Weigh. The PN-Series is built for accuracy and dependability. Features several weighing units as well as a counting feature. An RS232 port and cable are included for connection to a computer.

Features: 510 x 0.1g 10 weighing modes: gram (g), carat (ct), pound (lb), ounce (oz), troy ounce (oz), grain (GN), pennyweight (dwt), Newton (N), Tola (T), and T/A/R Parts counting Glass breeze-break with sliding doors RS-232 communication for connection to a computer - Cable included Includes CD with weight display program Easy calibration - Span or Linear
Removable Platform Makes Cleanup Easy

Capacity	510g
Readability	0.1g
Repeatability	±1d
Linearity	±2d
Response Time	2~3sec
Span Calibration Weight	250g
Linear Calibration Weight	500g, 250g
Scale Dimensions	11 x 7.9 x 3.0 "
Platform Dimensions	5.0" Ø
Ouput Interface	RS-232
Power	8 x “AA” Batteries or AC Adapter Input:120V 60hz / Output: 9V 200mA (included)
Warranty	1 Year Limited Warranty

American Weigh Scales, Inc.

Model: PN-2100A