Add to Cart:

American Weigh Blade Digital Pocket Scale 600 x 0.1 Gram Pink

$39.95

  • Model: BLADE-600 Pink
  • Shipping Weight: 0.8lbs
  • 6 Units in Stock
  • Manufactured by: American Weigh


American Weigh Scales LogoAmerican Weigh Scales, Inc.
Don't be fooled by the imitations. The Blade Scale from American Weigh is the original pocket scale with a retractable backlit display. Now the Blade Scale comes bundled with an extra large expansion tray and carrying pouch to hold everything. With a 10 year American Weigh Warranty and such a low, low price, it only makes sense to choose the original Blade Scale

Features:

  • Easy to use three key operation
  • Backlit display
  • Unique flip-out display
  • Available in other colors
  • Thin, compact design
  • Two layer protection: expansion trays and carrying pouch
  • Two sizes of expansion trays
  • Sleek pocket fit
  • 10 year warranty
American Weigh Blade-600 Digital Pocket Scale 600 x 0.1g Pink

American Weigh Blade-600 Digital Pocket Scale 600 x 0.1g Black

American Weigh Blade-600 Digital Pocket Scale 600 x 0.1g BlackAmerican Weigh Blade-550 Digital Pocket Scale 600 x 0.1g Side


American Weigh Blade-600 Digital Pocket Scale 600 x 0.1g Black
Capacity
600g / 19.401oz / 17.683ozt / 353.7dwt

Readability

0.1g / 0.005oz / 0.005ozt / 0.1dwt
Scale Dimensions
3.75" x 3.75" x 0.75"
Platform Dimensions
2.75" x 2.75"

Warranty

Calibration

10 Year Limited Warranty
500g calibration weight ( not included).
To purchase CLICK HERE
Power
2 x AAA Batteries (included)

Blade Series Manual

Thank you for purchasing the American Weigh BLADE-Series digital scale. Please read all operating instructions carefully before use. This electronic scale is a precision instrument. With normal care and proper treatment, it will provide years of reliable service. Never load the scale with more than the maximum capacity. Overloading will permanently damage it!

Avoid any exposure to extreme heat or cold. Your scale works better when operated at normal room temperature. Always allow the scale to acclimate to normal room temperature for at least one hour before use.

Give your scale sufficient warm up time. Usually

Keep your scale in a clean environment. Dust, dirt, moisture, vibration, air currents and a close distance to other electronic equipment can all cause an adverse effect on the reliability and accuracy of your scale.

Handle with care. Gently apply all items to be weighed onto tray top. Although this scale is designed to be quite durable, try to avoid rough treatment as this may permanently damage the internal sensor.

Avoid shaking, dropping or otherwise shocking the scale. This is a precision instrument and must be handled with extreme care.

Only operate the scale on a stable, vibration free surface.

I. OPERATION

30-60 seconds before calibration to give the internal components a chance to stabilize.

Place Scale on a horizontal flat surface.

1. Press [ON/OFF] key.

2. Wait until "0.0" is displayed.

3. Put the object(s) on the weighing platform.

4. Using the [MODE] key, you can switch between the

weighing units.

II. TARE WEIGHING

1. Turn on scale as described above.

2. Place the "tare item" on the platform.

3. Press [TARE] and wait until "0.0" is displayed.

4. Add the "net-weight-item".

III. CALIBRATION

Calibration is NOT required before first use. Only

calibrate if scale is not weighing properly.

**Make sure you use the correct calibration weight for

your scale or the calibration will not be accurate**

BLADE-50: 50g calibration weight

BLADE-400: 200g calibration weight

BLADE-550: 500g calibration weight

BLADE-600: 500g calibration weight

BLADE-1000: See section IV.Blade1000

Calibration Procedures

1. Turn ON the scale.

2. Press and hold the [MODE] key until "CAL" is displayed.

Release the [MODE] key.

3. Press [MODE] again. Now the display will read "CAL" and the required calibration weight will flash 3 times.

4. Place the required calibration weight for your scale on the center of platform. Wait 3-4 seconds. The LCD will display "PASS".

5. Remove the weight and press [ON/OFF] to turn off the scale. Finished! Repeat if necessary.

IV. BLADE1000 Calibration Procedures

You will need a 1000g (1kg) calibration weight.

1. Turn on the scale by pressing [ON/OFF] key.

2. Wait until the LCD displays "0.0" then press and

HOLD the [MODE] key for 3 seconds. The LCD will display "CAL". You can now release the [MODE] key.

3. Press [MODE] key again, the LCD will display "CAL" and "1000.0".

4. Add 1000g calibration weight, the display will show "PASS" and return to normal weighing mode.

5. Put away the calibration weight and press [ON/OFF] to turn off the scale. Finished! Repeat if necessary.

V. TROUBLESHOOTING

The primary reasons for inaccuracy or malfunction are low batteries, incorrect calibration, overload or

operating on an unstable surface. Please keep this in mind and maintain and operate your scale properly.

This scale is a precise instrument and must be handled with the utmost care and caution.

Nothing, Battery-Symbol, [lo] or [88888] Try new batteries

[OUE2] Recalibrate the scale as shown above.

[EEEEE] You are overloading the scale. Remove the excessive load immediately!

[Display] Elimination of errors Change the batteries.

[LLLLL] The delicate weighing load cells havebeen damaged by misusing the scale

(i.e. it was shocked, dropped or overloaded). You can try recalibrating the

scale. If the load cell has not been damaged too much it will work

again after recalibration.

[UNST] Use the scale in a more stable position

Add to Cart:



This product was added to our catalog on Wednesday 11 October, 2006.

Add to: Twitter Add to: Yahoo Add to: Favit Add to: Digg Add to: StumbleUpon Add to: Google Add to: Del.icio.us