AWS Blade 50 Gram Digital Pocket Grain Scale 50 x 0.01g Burgundy

  • Model: BLADE-50BUR
  • Shipping Weight: 0.8lbs
  • 45 Units in Stock
  • Manufactured by: American Weigh


Add to Cart:
Americanweigh LogoAmerican Weigh Scales, Inc.

Dont be fooled by the imitations. The Blade Scale from American Weigh is the original pocket scale with a retractable backlit display. Now the Blade Scale comes bundled with an extra large expansion tray and carrying pouch to hold everything. With a 10 year American Weigh Warranty and such a low, low price, it only makes sense to choose the original Blade Scale


  • Easy to use three key operation
  • Backlit display
  • Unique flip-out display
  • Available in other colors
  • Thin, compact design
  • Two layer protection: expansion trays and carrying pouch
  • Two sizes of expansion trays
  • Sleek pocket fit
  • 10 year warranty
American Weigh Blade Scale Logo
Blade scale instructions on how to open

Blade Scale Side View BlackAmericanweigh Blade Scale Side View Silver

Blade Scale Pouch Included and Cover doubles as a weighing tray
50g / 1.764oz / 250ct / 771.5gn


0.01g / 0.001oz / 0.05ct / 0.1gn
Scale Dimensions
3.75 x 3.75 x 0.75
Platform Dimensions
2.75 x 2.75
Calibration Weight
50g (not included)
10 Year Limited Warranty
2 x AAA Batteries (included)

Blade 50 Manual

Thank you for purchasing the American Weigh

BLADE-Series digital scale. Please read all operating

instructions carefully before use. This electronic scale

is a precision instrument. With normal care and proper

treatment, it will provide years of reliable service.

Never load the scale with more than the maximum

capacity. Overloading will permanently damage it!

Avoid any exposure to extreme heat or cold. Your

scale works better when operated at normal room

temperature. Always allow the scale to acclimate to

normal room temperature for at least one hour before


Give your scale sufficient warm up time. Usually

30-60 seconds before calibration to give the internal

components a chance to stabilize.

Keep your scale in a clean environment. Dust, dirt,

moisture, vibration, air currents and a close distance to

other electronic equipment can all cause an adverse

effect on the reliability and accuracy of your scale.

Handle with care. Gently apply all items to be weighed

onto tray top. Although this scale is designed to be

quite durable, try to avoid rough treatment as this may

permanently damage the internal sensor.

Avoid shaking, dropping or otherwise shocking the

scale. This is a precision instrument and must be

handled with extreme care.

Only operate the scale on a stable, vibration free



Place Scale on a horizontal flat surface.

1. Press [ON/OFF] key.

2. Wait until 0.0 is displayed.

3. Put the object(s) on the weighing platform.

4. Using the [MODE] key, you can switch between the

weighing units.


1. Turn on scale as described above.

2. Place the tare item on the platform.

3. Press [TARE] and wait until 0.0 is displayed.

4. Add the net-weight-item.


Calibration is NOT required before first use. Only

calibrate if scale is not weighing properly.

**Make sure you use the correct calibration weight for

your scale or the calibration will not be accurate**

BLADE-50 needs a 50g calibration weight

Calibration Procedures

1. Turn ON the scale.

2. Press and hold the [MODE] key until CAL is displayed.

Release the [MODE] key.

3. Press [MODE] again. Now the display will read

CAL and the required calibration weight will flash 3


4. Place the required calibration weight for your scale

on the center of platform. Wait 3-4 seconds. The LCD

will display PASS.

5. Remove the weight and press [ON/OFF] to turn off

the scale. Finished! Repeat if necessary.


The primary reasons for inaccuracy or malfunction

are low batteries, incorrect calibration, overload or

operating on an unstable surface. Please keep this in

mind and maintain and operate your scale properly.

This scale is a precise instrument and must be

handled with the utmost care and caution.

[Display] Elimination of errors

Nothing, Battery-Symbol, [lo] or [88888] Change the batteries.

[OUE2] Recalibrate the scale as shown above.

[EEEEE] You are overloading the scale. Remove the excessive load immediately!

[UNST] = Use the scale in a more stable position

[LLLLL] The delicate weighing load cells have been damaged by misusing the scale (ie. it was shocked, dropped or overloaded). You can try recalibrating the scale. If the load cell has not been damaged too much it will work again after recalibration.

This product was added to our catalog on Monday 24 December, 2007.

Join Uson

Manufacturer Info

Who's Online

There currently are 8 guests online.
Copyright © 2019 Powered by Zen Cart