Add to Cart:

Fast Weigh M-500 digital pocket scale 500 x 0.1 gram Black

$14.95

  • Model: M-500-BLK
  • Shipping Weight: 0.8lbs
  • 9 Units in Stock
  • Manufactured by: Fast Weigh


Fast Weigh LogoFast Weigh Scales

Model: M-500

Fast Weigh M-500 digital pocket scale 500x0.1g main

Introducing the new M-Series from Fast Weigh Scales! This hip little scale is one of the hottest and most economical scales on the market today! The removable cover keeps the scale protected when not in use and also doubles as an expansion tray. Just replace the plastic cover when your done using it, and you can safely toss the scale in your handbag or pocket with no worries. Best of all - the M-Series is available in 10 different colors, so you can express yourself.


Features:

Fast Weigh M-500 digital pocket scale 500x0.1g closed


Capacity
500g / 17.64oz / 16.08ozt / 321.5dwt

Readability

0.1g / 0.01oz / 0.01ozt / 0.1dwt
Scale Dimensions
3.4 x 2.3 x 0.75 "
Platform Dimensions
2.1 x 2.2 "
Warranty
10 Year Limited Warranty
Power
2 x AAA Batteries (included)

M-Series Manual

Thank you for purchasing the Fast Weigh M-Series digital scale. Please read all operating instructions carefully before use. This electronic scale is a precision instrument. With normal care and proper treatment, it will provide years of reliable service.

Never load the scale with more than the maximum capacity. Overloading will permanently damage it!

Avoid any exposure to extreme heat or cold. Your scale works better when operated at normal room temperature. Always allow the scale to acclimatize to normal room temperature for at least one hour before use.

Give your scale sufficient warm up time. Usually 30-60 seconds before calibration to give the internal components a chance to stabilize.

Keep your scale in a clean environment. Dust, dirt, moisture, vibration, air currents and a close distance to other electronic equipment can all cause an adverse effect on the reliability and accuracy of your scale.

Handle with care. Gently apply all items to be weighed onto tray top. Although this scale is designed to be quite durable, try to avoid rough treatment as this may permanently damage the internal sensor.

Avoid shaking, dropping or otherwise shocking the scale. This is a precision instrument and must be handled with extreme care. Only operate the scale on a stable, vibration free surface.

I. OPERATION

Place the scale on a flat surface.

1. Press the [POWER/TARE] key to turn the scale on.

2. Wait until "0.0" or "0.00" is displayed.

3. Place the object(s) on the weighing platform.

4. Using the [MODE] key, you can switch between the different weighing units.

5. When finished weighing, you can hold the [POWER/TARE] key to turn the scale off.

II. TARE WEIGHING (subtracts the weight of a container.)

1. Turn on scale as described above.

2. Place the "tare item" (container) on the platform.

3. Press [POWER/TARE] and wait until "0.0" or "0.00" is displayed.

4. Add the "net-weight-item" (weight of contents only).

III. CALIBRATION

Calibration is not required before first use. Only

calibrate if scale is not weighing properly.

M-50 - uses a 50g calibration weight

M-100 - uses a 100g calibration weight

M-250 - uses a 200g calibration weight

M-500 - uses a 500g calibration weight

M-100 Calibration Method

1. Turn OFF the scale.

2. Press and hold the [MODE] key and [POWER/TARE] key at the same time until the display shows a random number.

3. Release the [POWER/TARE] key and [MODE] keys.

4. Press the [POWER/TARE] key again. The display will show AL 0 followed by the required calibration weight. Place the required weight on the scale.

5. Once the scale is stable, the LCD will display AL F. Calibration is complete! AL E means calibration failure (Repeat steps 1 - 5)

M-50, M-250, M-500 Calibration Method

1. Turn OFF the scale.

2. Press and hold the [MODE] key and [POWER/TARE] key at the same time until the display shows a random number.

3. Release the [POWER/TARE] key and [MODE] keys.

4. Press the [POWER/TARE] key again. The display will show AL 0 followed by the required calibration weight. Place the required weight on the scale.

5. Press [POWER/TARE] once more. If the display shows AL F, calibration is complete! AL E means calibration failure (Repeat steps 1 - 5).

lV. TROUBLESHOOTING

The primary reasons for inaccuracy or malfunction are low batteries, incorrect calibration, overload or operating on an unstable surface. Please keep this in mind and maintain and operate your scale properly. This scale is a precise instrument and must be handled with the utmost care and caution.

[Display] Elimination of errors

[LO-] Replace the batteries.

[o-Ld] You are overloading the scale. Remove the excessive load immediately!

[AL E] A calibration error has occured. If the error coninues, the delicate load cells may have been damaged.

Add to Cart:



This product was added to our catalog on Wednesday 28 March, 2007.

Add to: Twitter Add to: Yahoo Add to: Favit Add to: Digg Add to: StumbleUpon Add to: Google Add to: Del.icio.us